Owner's Manual

Tru Pointe® Ultra Instruction 0028-9000

SoundBlaster

Applications

The SoundBlaster

is an excellent tool for weatherizing buildings by detecting leaks in windows,

doors and roofs. To effectively use the SoundBlaster

and Tru Pointe

Ultra HD to check for

building leaks:

1. Place the SoundBlaster

in the room to be leak tested and turn it ON

2. From outside the room begin scanning for leaks with the Tru Pointe

Ultra around

the perimeters of the doors and windows.

3. If the Tru Pointe

Ultra HD reading is at ‘10’, reduce the sensitivity until the

detector reads 4-5 and begin scanning again. Readings above the 4-5 threshold

indicate a larger leak and should be ﬁ xed prior to leaks that register under the

threshold.

4. A clear pattern of high and low readings should develop and pinpoint the location

of the highest priority leaks.

Other SoundBlaster

applications include locating, air/water leaks in automobile windshields,

trunk seal leaks, truck body leaks, and tanker leaks.