Specifications

TODOL PRODUCTS GUN FOAM STARTER KIT ONE TIME USE SYSTEM FOAM
• Each Kit comes with a 10' hose and wand
• Meets ASTM E-84, E-814 and UL-1715
• Yields: 10 lb kit = 3,800 linear feet @ 1/2" bead
16 lb kit = 6,100 linear feet @ 1/2" bead
* 3530.02 10 lb Polyurethane Foam System
*
3530.022 16 lb Polyurethane Foam System
3530.025 Extra 10' Gray Hose with Wand
• Attach hose directly to a gun
for neater application
• Shut-off valve included on the gun
6510.307 Bottom Load Gun for 10 and 16 lb Tanks
Gun and Foam Starter Kit
• Ideal for carrying and storing foam/gun assembly
3530.10 Gun and Foam Starter Kit includes:
• Carrying case
• Pageris gun
• Two 33 oz canisters of PUR FILL 1G
• 10 Disposable needle tips for Pageris gun
• Can spray cleaner
3530.11 Carrying Case for Gun and Foam
Low expansion foam should be thought of as an Air Sealing product
that can be used to block air leaks in buildings from inside to outside,
from outside to inside, and from room to room within the structure.
Typically used for small holes, seams and linear gaps, low expansion
foam is
a quick and economical way to help make buildings more
comfortable and energy efficient.
Using Low Expansion Foam
• Use for:
– Cracks and small openings around windows and doors
– Plumbing, HVAC and electrical penetrations
– Seams and small openings in framing
• Single component — moisture cured. Moisture from the air or
surface of wood promotes curing. Use a spritzer during very cold,
dry weather to induce curing.
• 20 minutes to full cure. Less than 10% expansion when cured
• The can of foam re
mains attached to the gun between uses
eliminating waste
•
The trigger can be set to control the bead size
• Cleaner should be used infrequently
Uses and Information
Low Expansion Foam Information
National distributor shipping direct throughout the United States
to place orders or for more information:
800 / 876 / 0660
 fax 888 / 440 / 4219
Wisconsin 800 / 962 / 7015
 Wisconsin fax 920 / 757 / 6452
headquarters 40 Washington Street, Westborough, Massachusetts 01581 • www.efi.org/wholesale
25
NOTE:10 & 16 lb tanks and 200 and 600 kits shipped via UPS require a $20.00 Haz-Mat charge per unit.