Specifications

Timers and Controls
REVERSE THERMOSTAT
• 4 wires plus ground
• Fits in a single gang box,
can be installed in 2 or
3 gang boxes
• Decora style plate
• Independent fan and light controls
• 24 hour clock display
• 120 vac, 2.5 amps, 300w max output
The Airetrak Advantage™ allows the installer to set up a pattern of
low speed operation for the fan, giving the occupant the ability to
boost the fan to full speed when needed.
The low
speed pattern is set in 5 minutes segments over either 12
or 24
hours. Choose the low speed, choose how many minutes per
hour, (5, 10, 20 etc), then choose to repeat this pattern for either
12 hours or 24 hours. At the top of each hour the fan will come on
for the set time at the set speed.
The full speed boost function can be set for 20 minutes, 40 minutes
or continuous. Use the “Fan Only” button
to boost the fan without
turning on
the light, use the “Fan & Light” button to turn on both.
Push the button again to stop the override and return to the low
speed operation.
5010.431 Airetrak Advantage Timer — White
AIRETRAK ADVANTAGE ™
AIRCYCLER FR
AIRCYCLER FR
-V
The AirCycler FR is a timing device that can be used to circulate
fresh air throughout the home. It can be used in homes that have a
ducted heating or air conditioning system.
The AirCycler FR will periodically run the furnace blower motor if
the thermostat has not called for heat or air conditioning for a set
period of time. With an exhaust fan running in the home, this
action will serve to distribute
incoming fresh air throughout the
home by mixing the indoor
air.
The FR-V model contains an extra relay that is wired to a motorized
damper installed in an intake duct for the purpose of bringing fresh
air directly in to the duct system when the furnace blower motor is
turned on by the AirCycler.
5010.75 AirCycler Timer Model FR
5010.751 AirCycler Timer Model FR-V
Parts used with the FR-V model to bring in fresh air:
5540.3 6" Air Control Damper NC
Low voltage (normally closed)
5540.32 6" Intake Grille — White
5540.321 6" Intake Grille — Brown
Supply
Return
Furnace/air
handler
6"
insul-
ated
air
inlet
duct
Intake
grille
Air
control
damper
Air cycler
Supply
INSTALLATION EXAMPLE
• 2 wires
• Surface Mounted Control,
requires its own box
Available in beige only. Often
used with whole house cooling
fans and for recirculating heat from
wood stoves. With a range of 80°F to 130°F,
this control will turn a fan on when the temperature rises and turn it
off when the temperature falls.
5010.62 Reverse Thermostat — Beige
23
National distributor shipping direct throughout the United States
to place orders or for more information:
800 / 876 / 0660
 fax 888 / 440 / 4219
Wisconsin 800 / 962 / 7015
 Wisconsin fax 920 / 757 / 6452
headquarters 40 Washington Street, Westborough, Massachusetts 01581 • www.efi.org/wholesale