Specifications
Timers and Controls
FAN DELAY TIMER SWITCH 24 HOUR ELECTRO-MECHANICAL TIMER
• 3 wires
• Fits in a single gang box, comes with its own faceplate
• Allows the homeowner to use an exhaust fan for
background ventilation
With 72 pins representing 20 minutes each, an on-off pattern can
be set that suits the homeowner’s needs. i.e. 20 minutes per hour,
20 minutes every 2 hours, 20 minutes per hour part of the day and
40 minutes per hour part of the day.
This timer also has a three-position
slide switch — off, auto and on. If the homeowner does not need the
fan running,
slide the switch to “off”. Use it on “auto” for a timed
on/off pattern. Slide the switch to “on” and the fan will run
continuously. Often this timer is located out of sight and wired in
parallel with an on/off wall switch that will run the fan as needed.
5010.2
24 Hour Timer Single Gang
5010.22
24 Hour Timer 2 Gang — One Toggle
5010.24
24 Hour Timer 3 Gang — Two toggles
24 Hour Timer Single Gang
Information:
All of our timers are compatible with standard residential wiring, 120 vac. Some require 120 vac power to operate the timer itself.
Most require grounding. It is best to have a licensed electrician install fans and timers to insure safety and code compliance.
Some of the timers are programmable, some have a speed control option and some have an override function so as to use
the fan on full speed for a period of time. Please call if we can help you with your selection.
• 2 wires
• Surface mounted control,
requires its own box
• Range = 20%–80% R.H.
Often wired in parallel with an on-off wall
switch, dehumidistats are used to insure
that a fan will run when humidity rises.
The best place to locate a dehumidistat is
in the bathroom, high on the wall. The
unit has a dial that can be ad
justed to
respond to
various levels of humidity.
5005.02
Line Voltage Dehumidistat
LINE VOLTAGE DEHUMIDISTAT
• 4 wires
• Can be used with an
over-ride switch
• Fits in a single gang box
Line voltage speed controls, used to run
a fan at lower than full speed. Can be
installed on its own or in parallel with an on/off switch so that the fan
will run at low speed continuously and have the ability to override fo
r
full speed
boost. NOT COMPATIBLE WITH PANASONIC FANS.
5510.32
Dial Speed Control — Brushed Steel
VARIABLE SPEED CONTROL
• 4 wires, plus ground
• Fits in a single gang box, can be installed in 2 or 3 gang boxes
• Allows extra ventilation after the occupant has left the bathroom
• 50 Switches per case
A two-function switch that is typically wired to a fan and a light.
When entering the bathroom, flipping the switch turns on both the
fan and light. When leaving, flipping the switch turns off the light,
and starts the timer al
lowing the fan to continue running for a preset
time. A
dial under the faceplate is used to set the delay off time
from 5–60 minutes. Usually 25 minutes is the ideal setting to clear
the bathroom of moisture.
5100.504
Fan Delay Timer — White
5100.505
Fan Delay Timer — Ivory
5100.506
Fan Delay Timer — Almond
Ivory
21
National distributor shipping direct throughout the United States
to place orders or for more information:
800 / 876 / 0660
fax 888 / 440 / 4219
Wisconsin 800 / 962 / 7015
Wisconsin fax 920 / 757 / 6452
headquarters 40 Washington Street, Westborough, Massachusetts 01581 • www.efi.org/wholesale
Almond White