Since 1982 Wholesale Products Catalog Direct Sales to: • Builders • Utilities • Contractors • Agencies • Trades • ESCOs efi.
Thank You Thank You Very Much The Wholesale Division of EFI would like to express our appreciation to you for your continued business and loyalty. We have had the pleasure of serving many of you for as long as 20 years. Over those years, we have grown together, learning about new technologies, learning building science and learning how to deliver a better product or service to our customers. We are committed to continue learning about new products and techniques along with you for many years to come.
Wholesale Website www.efi.org/wholesale Never hesitate to give us a call to place orders, ask questions or get information. If you would like to order on-line, we invite you to use the EFI e-business site. This is an easy to use, basic web site that allows existing customers to place orders, and check pricing. The initial landing page is located at www.efi.org/wholesale. This page contains basic company information, phone numbers, addresses and maps to our locations.
all copper dhw solar collectors Information: With over 20 years of manufacturing experience, these all copper collectors are built to last while looking clean and neat when installed. Most homes will use a one or two panel system for domestic hot water depending on your location and water usage. EFI is carrying Aurura panels measuring 4' x 8' or 4' x 10'. Aurura panels can be used for space heating if desired. • Made in the USA • Copper fin absorber plate ultrasonically welded to copper risers • .
DHW Solar System Parts and Accessories Drain Back Tank and Tank Stand Sweat Flow Meter Pressure Gauge for Expansion Tank Differential Control Kit Storage Tank Kit Controls and Pumps 7600.031 Differential Control Kit 7600.51 Taco Pump 006 BC4 — For Full System 7600.52 Taco Pump 009 BF5 — For Drain Back System 7600.521 Mounting Flange for 009 BF5 System Tanks 7600.033 Drain Back Tank — 10g w/Site Glass 7600.035 Drain Back Tank Stand — 6" Alum 7600.036 Thermal Expansion Tank — 2 Gallon 7600.
Whole House Ventilation System Tips Heat and Energy Recovery Ventilators (HRVs and ERVs) are whole house ventilation systems that can provide a continuous stream of fresh outside air while exhausting stale indoor air. These machines are the best ventilation solution available for comfort, health and safety when constructing a tight home. HRVs and ERVs are low flow systems that are usually run continuously whenever the house is closed up.
Fantech Whole House Ventilation Systems SUPER COMPACT HEAT RECOVERY VENTILATORS These New Super Compact HRVs and ERVs from Fantech are the perfect solution to provide fresh air to small homes under 1,500 square feet. Their compact size uses 4" round duct, making them easy to install and quiet to operate. They are supplied with a hanging bracket and 3-prong plug.
Fantech Whole House Ventilation Systems HEAT AND ENERGY RECOVERY VENTILATORS TIP: Use HRVs and ERVs to provide fresh air to the entire house while exhausting stale air. These are balanced ventilation systems. In typical installations, fresh outside air is supplied to bedrooms and home offices while indoor air is exhausted from bathrooms, exercise rooms and kitchens. See page 3 for installation tips and techniques.
Fantech Whole House Ventilation Systems CENTRAL CONTROLS FOR FANTECH HRVS AND ERVS Full Feature Central Control • Soft touch control pad • On/Off power button • Digital humidity percent display • 2 operating modes (continuous or intermittent) • 3 fan speeds — low-medium-high • 15, 30, & 60 minute override timer • 2-wire connection • Filter maintenance reminder indicator light • 2 wires, low voltage 5504.63 5504.
Radon Control Products Information: EFI makes no claim that using these products will solve a radon problem and as a result, EFI is not liable for any damages or claims which may arise from the use of these products. It is incumbent on the installer to follow all applicable federal, state and local codes associated with radon control. We recommend testing for radon both before and after installing radon control products and consulting with the EPA and local health departments for guidance.
Panasonic Whisper Quiet ERV WHISPER COMFORT ERV — ENERGY RECOVERY VENTILATOR TIP: Use this Spot ERV to provide balanced ventilation in large single rooms like home offices or bedroom suites, or in small condominiums and apartments. This unit brings in fresh air while exhausting stale air, recovering heat in the process. The Panasonic ERV is NOT intended to be used as a bathroom exhaust fan. Theses units run on low speed continuous (10 or 20 CFM) with the ability to boost to high speed (20 or 40 CFM).
Panasonic Whisper Green Ceiling Fans Information: The new Whisper Green fans are designed to overcome the resistance created by elbows, curves and terminations in ductwork. A built-in sensor adjusts the fan speed in order to maintain the desired CFM rate. These fans are able to overcome up to 60 equivalent feet of duct work. If you buy an 80 CFM Whisper Green fan, you get 80 CFM even when installed.
Panasonic Whisper Quiet Ceiling Fans WHISPER CEILING FAN AND FAN/LIGHT WHISPER FIT CEILING FAN AND FAN/LIGHT 5 5⁄8" Deep Housing TIP: Use these fans when remodeling and installing a fan 7 7⁄8" Deep Housing between floors. These housings fit in 2 x 6 framing and come with a 4" to 3" adaptor in case you need to use the old ductwork. Change and update the ductwork if you can.
Panasonic Whisper Quiet Fans WHISPER VALUE PRODUCTION GRADE FANS RADIATION DAMPER FOR PANASONIC CEILING FANS 8 5⁄8" Deep Housing • • • • • Fits the following models: – Whisper Ceiling Fan 05-11VQ3 and 15VQ4 Ideal for production situations Can be mounted vertically or horizontally 3.75" deep housing fits in 2 x 4 framing Great up grade for affordable housing development – Whisper Fit Fan 05-11VF2 – Whisper Green Fan 08VKS1 and 08VK1 MODEL CFM SONES POWER FV 05VS1 FV 08VS1 FV 10VS1 50 80 100 0.8 1.
Ventilation Solutions, Options and Tips Ceiling Surface Mounted Fans Ductwork Tips and Techniques • Use for single point or spot ventilation • Use timers or speed controls for continuous or intermittent whole house ventilation • Use rigid duct whenever possible for better air flow • If using flex duct, support it with strapping to avoid dips • Use a short piece of flex duct at the fan connection to break vibration noise in the duct • Insulate any ducts in un-conditioned spaces to avoid condensation and ener
Fantech Range Hood Liners RANGE HOOD LINERS FOR USE WITH CUSTOM RANGE HOODS 48" SHL • Pre-wired for use with remote in-line or exterior fans • Dimmable halogen lights included • Variable speed control included • Removable and washable aluminum filters • See page 55 for dimensions through roof vent In-Line Fan Silencer Duct TIP: Take the noise out of the kitchen by using a remote exhaust fan with a hood liner.
Fantech Premium Bath Fans SINGLE POINT EXHAUST FANS • Includes fan motor with ceiling grille, housing, and back draft damper MODEL CFM FAN DUCT HOUSING DUCT GRILLE In-Line Exhaust Fans 5501.914 5501.915 5501.916 PB-100-V PB-100-F PB-100-H 100 100 100 4" 4" 4" 4" 4" 4" Vent Only 14w Fluorescent 50w Dimmable Halogen 5501.922 PB-190-V 190 6" 6" Vent Only 110 110 110 4" 4" 4" 4" 4" 4" Vent Only 14w Fluorescent 50w Dimmable Halogen Exterior Wall Mount Fans 5501.917 5501.918 5501.
Fantech Ventilation Fans TIP: Use these remote mounted fans for exhausting bathrooms, laundry rooms, basements and crawl spaces. Remote mounted fans can exhaust from multiple points in large rooms or from separate rooms with one fan. They can be used for dryer boosting, kitchen range hoods or for re-circulating heat or AC within a building. See page 12 for more ideas.
Fantech Ventilation Fans RE AND REC SERIES ROOF-MOUNTED EXHAUST FANS • Available to fit both pitched roofs and flat roofs • Can be roof mounted or wall mounted • Permanently lubricated sealed ball bearings • 100% speed controllable • RE fans have a flat base • REC fans have a 1/2" depth box designed to be installed on a roof curb MODEL 5501.47 5501.49 5501.50 5501.52 5501.53 5501.
Broan Quiet Exhaust Fans BROAN QUIET EXHAUST FANS • • • • All Broan fans are manufactured in the USA, in Hartford, WI. CFM Rates from 80 to 150 CFM available QTXE Models feature 6" Duct for better performance Models with lights use the following: – 42w Fluorescent bulb, 3,500° Kelvin, 125w equivalent – 4w Incandescent nightlight — not included • UL listed for use over tubs and showers when connected to a GFCI circuit Fan with Light Units Fan Only Units MODEL CFM SONES POWER MODEL DUCT 5507.
Whole House Exhaust Fans TAMARACK TECHNOLOGIES WHOLE HOUSE FANS These Whole House Fans offer an energy efficient way to cool down your house without using air conditioning when the outside temperature is lower than the inside temperature. High quality, balanced fan motors draw outside air into your home through doors and windows while blowing indoor air up into the attic where it leaves the house through ridge, soffit or gable vents.
Ventilation Accessories EXHAUST/SUPPLY GRILLES AND COLLARS Designer Style • Low profile, not adjustable • Matches Fantech grille-light unit 5540.001 5540.003 4" Designer Exhaust Grille 6" Designer Exhaust Grille Traditional Style • Adjustable, use for both exhaust and supply • Diffuses air across ceiling or wall 5540.01 5540.02 4" or 5" Adjustable Supply/Exhaust Grille 6" Adjustable Supply/Exhaust Grille 5540.
Ventilation Accessories DUCTWORK COMPONENTS OUTDOOR EXHAUST HOODS AND LOUVERS “Y” Connectors Roof Mounted — Painted metal 4510.41 4" Black Roof Cap w/collar 4530.30 4530.31 4530.33 4530.32 4530.321 4" 6" 6" 8" 8" x x x x x 4" 6" 4" 8" 6" x x x x x 4" 6" 4" 8" 6" Y Y Y Y Y Duct Duct Duct Duct Duct 4510.411 4510.410 4" Black Roof Cap only 4" Connector Collar only 4510.40 6" Black Roof Cap includes collar Wall Mounted — Metal Reducers/Increasers 4530.36 4530.35 4530.
Timers and Controls Information: All of our timers are compatible with standard residential wiring, 120 vac. Some require 120 vac power to operate the timer itself. Most require grounding. It is best to have a licensed electrician install fans and timers to insure safety and code compliance. Some of the timers are programmable, some have a speed control option and some have an override function so as to use the fan on full speed for a period of time. Please call if we can help you with your selection.
Timers and Controls 30-15-10-5 OR 60- 30-20-10 ELECTRONIC TIMER • 4 wires • Fits in a single gang box, can be installed in 2 or 3 gang boxes • Decora style faceplate Allows the homeowner to choose the appropriate amount of run time. There are five small buttons with LED lights that indicates run time. “Off” can be used to cancel the run. 5010.71 5010.70 30-15-10-5 Minute Timer — White 30-15-10-5 Minute Timer — Ivory 5010.743 5010.
Timers and Controls AIRETRAK ADVANTAGE ™ • 4 wires plus ground • Fits in a single gang box, can be installed in 2 or 3 gang boxes • Decora style plate • Independent fan and light controls • 24 hour clock display • 120 vac, 2.5 amps, 300w max output The Airetrak Advantage™ allows the installer to set up a pattern of low speed operation for the fan, giving the occupant the ability to boost the fan to full speed when needed. The low speed pattern is set in 5 minutes segments over either 12 or 24 hours.
Super Efficient HVAC System Blower Motor CONCEPT 3™ MOTOR The Concept 3™ motor is a brushless, permanent magnet motor. The Concept 3™ motor is a drop-in replacement for the common Permanent Split Capacitor (PSC) motor that is used in most furnaces, air conditioners and heat pump systems using a 24v thermostat.
Low Expansion Foam Information Using Low Expansion Foam Uses and Information Low expansion foam should be thought of as an Air Sealing product that can be used to block air leaks in buildings from inside to outside, from outside to inside, and from room to room within the structure. Typically used for small holes, seams and linear gaps, low expansion foam is a quick and economical way to help make buildings more comfortable and energy efficient.
Low Expansion Foam ‘NSEAL TODOL PRODUCTS GUN FOAM TOUCH Pur-Fil Foam and Construction Adhesive • Less than 10% expansion • 20 minute cure time 3530.20 Touch ‘nSeal All Season — 24 oz • Can be dispensed down to 20°F • Must use mister for curing • 977 linear feet @ 3 ⁄ 8" bead 3500.64 Touch ‘nSeal No-Warp — 20 oz • Exerts less curing pressure • 932 linear feet @ 3 ⁄ 8" bead 3530.
High Expansion Foam Information Using High Expansion Foam High expansion foam should be thought of as an Air Sealing product that can be used to block air leaks in buildings from inside to outside, from outside to inside, and from room to room within the structure. Typically used for bigger voids and openings, high expansion foam is a quick and economical way to help make buildings more comfortable and energy efficient.
High Expansion Foam 200 BOARD FOOT KIT 16.6 CUBIC FEET 600 BOARD FOOT KIT 50 CUBIC FEET 200 Board Foot Kit U2 — 600 A & B Tanks • Each tank weighs 60 lbs (Kit = 120 lbs) • FR = Fire Retardant Formula, Class 1, ASTM E-84 • Gun/hose assembly not included 3530.406 3530.407 600 A & B Tanks 600 A & B Tanks — FR 200 Board Foot Kit — 16.6 Cubic Feet • Kit weighs 39 lbs • Includes 10' gun/hose assembly with nozzles • FR = Fire Retardant Formula, Class 1, ASTM E-84 3530.405 3530.
High Expansion Foam Dispensing System CONSTANT PRESSURE DISPENSING SYSTEM The CPDS 1000, Constant Pressure Dispensing System uses an air compressor to deliver the A and B components through the gun/hose assembly resulting in a better flow and more consistency. Constant pressure gives the user even and complete dispensing of foam. Up to 120' of hose can be attached to the CPDS 1000. This allows the user to work in a wide range without having to move a set of tanks over and over.
Weatherization Materials DOOR WEATHER-STRIPPING • Q-lon vinyl faced foam mounted on painted aluminum, painted wood or vinyl carrier • Q-lon maintains flexibility to –4°F • Seals up to 1" gaps, compensating for door bowing or warping • Two 6'8" side stops, one 3' header piece Q-lon Weather-Stripping Kits 3540.13 3540.12 Q-lon with Aluminum Carrier — White Q-lon with Aluminum Carrier — Brown 3540.18 3540.19 Q-lon with Wood Carrier — White Q-lon with Wood Carrier — Brown 3540.401 3540.
Air Sealing Supplies TU-TUF VAPOR BARRIER DUCT SEALING SUPPLIES Mastic RCD #6 is a cream colored non-toxic adhesive sealant used to seal joints and seams of low to high velocity air ducts. • Water based, fiber reinforced • Elastomeric White Translucent • White cross-laminated virgin poly sheeting; made from high-density resins • Use on warm side of outside walls; under concrete flooring; around outside perimeter of foundations • 6.4x more puncture resistant than low-density 4-mil poly Vapor Permeance: 0.
Air Sealing Supplies AIR-TITE COVER PLATES LESSCO AIR AND VAPOR TIGHT ELECTRICAL BOXES • Use behind standard electrical boxes • Fits up to a 3-gang box • Sturdy flange for air/vapor barrier attachment 5700.01 LESSCO Box — 60/case AIRFOIL AIR AND VAPOR TIGHT ELECTRICAL BOXES • Heavy plastic plates in White or Ivory (Leviton) • Gasket pre-installed — no cutting • Outlets have a snap in plastic plate for sealing when not in use • Fits standard wall switches and 3-prong plugs • Screws included 3530.
Attic Stair Covers LADDERMATE AND ACCESSMATE THERMA-DOME • • • • • Insulation cover for folding attic stairways Constructed of a durable, laminated foil urethane insulation Foam gaskets and tie-downs provide continuous draft seal R-Value = 13.6, 1.5" Rigid Foam Inside dimensions 27" W x 57" L x 10.5" H 3570.
Spill Alarm and Power Pipe POWER-PIPE DRAIN WATER HEAT RECOVERY VENT RITE SPILL ALARM When and where should this alarm be installed and used? This Vent-Rite Spill Alarm should be installed on any natural drafting appliance that fails a combustion safety test, or on one that is remaining in the home after energy improvements have been completed. These appliances may be susceptible to spillage especially when changes are made to the building.
Meters and Monitors BLUE LINE POWERCOST MONITOR™ The Blue Line PowerCost Monitor ™ is a powerful in-home measurement and reporting unit that provides real-time feedback on electricity use. By providing information about where and when electricity is being consumed, this monitor helps people understand how they are using electricity. Without any interference with the meter, the outdoor sensor unit can be installed easily without an electrician.
Testing Equipment FYRITE™ INSIGHT COMBUSTION ANALYZER • • • • Residential use In-field calibration and sensor replacement Little or no down time Measures the following – Combustion and Efficiency – Room Air CO – Flue Gas CO MONOXOR™ III CARBON MONOXIDE ANALYZER • • • • • Analyze ambient air and stack gases Battery powered (4 AA), hand held Measure levels between 0 and 2,000 ppm Includes probe and 5' of tubing Accuracy = +/–5% of reading Bacharach Monoxor™ III – Dual Channel Digital Temperature Reading
Carbon Monoxide Detectors CARBON MONOXIDE ALARMS HARD WIRED — NEW CONSTRUCTION • Digital display — continuous monitoring • Interconnect with up to 24 units • Sealed cover protects sensor during construction • Battery backup • 85 db alarm 5020.
Smoke and Fire Detectors WIRELESS SMOKE DETECTOR Information: There are two types of sensors available — Photoelectric and Ionization. Photoelectric Sensors detect smoldering, slow moving fires while Ionization Sensors detect fast moving fires with flames. Smoke Detectors that have both sensors are always a good choice to ensure maximum safety. Installers should check with local code officials to make sure you are in compliance with local regulations.
Thermostats HEATING AND COOLING ELECTRONIC THERMOSTAT Programmable • Use for heating only or heating/cooling • 5–2 day programming, 4 settings per day • Operates in automatic, manual, or vacation modes • Battery operated with low battery indicator, holds program when changing batteries • Wall plate accepts 2, 3, 4, or 5 wires • Dimensions: 4.8" x 3.25" x 1.125" 5000.
Compact Fluorescent Lighting Energy Federation offers a wide selection of energy efficient lighting products — the latest technologies in compact fluorescent lights (CFLs). CFLs are designed to produce a high-quality, incandescent-like warm light and use about 70% less electricity than conventional incandescent lights. Most good quality CFLs are rated to last between 6,000 and 10,000 hours. This usually translates to a 2 – 4 year lifetime depending on usage. (One year is 8,760 hours.
Compact Fluorescent Spirals SPIRALS TCP Spirals Average Rated Lifetime: 10,000 hours Color Temperature: 2,700° Kelvin CRI: 81 Minimum Starting Temperature: –20°F Case Quantity: 48 Low Mercury Earthmate Low Mercury Super Mini T2 Spirals • Less than 2 milligrams of mercury Average Rated Lifetime: 10,000 hours Color Temperature: 2,700° Kelvin CRI: 82 Minimum Starting Temperature: 0°F Case Quantity: 50 Lumens 1100.322 1100.323 1100.324 1100.325 13w 15w 20w 23w Lumens 1100.336 1100.337 1100.338 1100.
Compact Fluorescent Spirals 3-WAY AND DIMMABLE SPIRAL CFLS Earthmate 3-way Spiral Average Rated Lifetime: 10,000 hours Color Temperature: 2,700° Kelvin CRI: 82 Minimum Starting Temperature: –20°F Wattage: 12 – 2 2– 33w Case Quantity: 30 1100.333 33w 3-way Lumens Dim 700 – 1,500 – 2,225 2.5" x 5.3" Philips 3-way Double Spiral Average Rated Lifetime: 10,000 hours Color Temperature: 2,700° Kelvin CRI: 82 Minimum Starting Temperature: –22°F Wattage: 11– 23– 34w Case Quantity: 6 1100.
Compact Fluorescent Capsules and Globes “A” GLOBE STYLE CFLS STYLE CFLS MaxLite “A” Style Average Rated Lifetime: 1100.909 — 15,000 hours 1100.910 — 8,000 hours 1100.927 — 10,000 hours Color Temperature: 2,700° Kelvin CRI: 84 Minimum Starting Temperature: 0°F Case Quantity: 12 1100.909 1100.910 1100.927 13w 13w 20w Lumens Dim 800 800 1,050 2.4" x 4.3" 2.4" x 4.3" 2.6" x 5.8" 1100.794 14w COLD CATHODE 800 “A” 2.4" x 4.8" 5w Dim 495 800 950 3.1" x 4.3" 3.1" x 4.7" 3.7" x 4.9" 1100.
Compact Fluorescent Reflectors REFLECTORS GE Dimmable Reflectors Average Rated Lifetime: 6,000 hours Color Temperature: 2,700° Kelvin CRI: 82 Minimum Starting Temperature: 5°F Case Quantity: 6 1160.607 1160.608 15w 26w R-30 R-40 Lumens Dim 720 1,300 3.75" x 5.1" 5.0" x 6.9" Lumens 15w R-30 600 14w R-20 3.7"x 5.7" Lumens Dim 530 5" x 2.5" 1160.505 1160.
Compact Fluorescent Recessed Lights TCP DIMMABLE RETROFIT RECESSED CAN KIT FLUORESCENT RECESSED CANS TIP: Order a 13w housing and 13w lamp, or a 26w housing and 26w lamp. Then select 1 of 3 trim styles — clear lens, open white smooth or open white baffle. Kit comes complete with ballast and screw-in adapter for medium base sockets, replaceable 20w bulb and installation hardware. Fits all 6" cans. 90w incandescent equivalent. 1440.405 1440.406 20w Universal 20w Juno/Halo 7.25" Dia. x 6.5" L 7.25" Dia.
Compact Fluorescent Replacement Lamps REPLACEMENT LAMPS FOR FIXTURES CFL Disposal Information: CFLs contain a very small amount of mercury sealed within the glass tubing — an average of 5 milligrams — about the amount that would cover the tip of a ballpoint pen. Mercury currently is an essential component of CFLs and is what allows the bulb to be an efficient light source. No mercury is released when the bulbs are intact or in use.
Energy Efficient Fixtures Lighting Selection EFI carries a variety of energy efficient fixtures. We make every attempt to select vendors and products based on the value they bring and the quality of their products and services. We have access to these manufacturers’s entire line of energy efficient fixtures. If you are doing a project, we can help. We will work with you to choose the appropriate fixtures. Some of the manufacturers that we work with include: Go to www.efi.
LED Lighting Information LED: Light Emitting Diode Information LEDs (Light Emitting Diodes) have been in use for many decades. Until recently, most of us have seen them only as red or green power-on indicator lights for home electronic equipment. Manufacturers are finding more and more uses for LEDs in the commercial and residential markets and are spending time and resources developing ways to achieve various colors and wavelengths while making them brighter, dependable and economical.
LED Recessed Lights PROGRESS LIGHTING LED RECESSED CANS CREE LR5 AND LR6 SCREW-IN DOWN LIGHTS LR5 LR6 New Title 24 Compliant Cans and Trim with Quick-Link Connections • • • • • 4" and 6" Recessed Cans • Airtight and IC rated • New Construction or re-hab • 4" and 6" cans available 1440.321 1440.
LED Lighting Products GE R-30 LED REFLECTOR LED REFLECTORS Maxlight R-20 LED Reflector Average Rated Lifetime: 50,000 hours Color Temperature: 2,700° Kelvin CRI: 82 Minimum Starting Temperature: 5°F Case Quantity: 12 1100.024 2.2w Lumens Dim 44 2.5" x 4.0" R-20 Average Rated Lifetime: 20,000 hours Color Temperature: 3,000° Kelvin CRI: 82 Minimum Starting Temperature: 5°F Case Quantity: 6 1160.614 GE R-20 LED REFLECTOR 7w Lumens Dim 200 3.93" x 2.5" R-20 Lumens Dim 340 3.63" x 3.
Quick Flash Rain Control Panels QUICKFLASH™ WEATHERPROOFING PANELS TYPICAL INSTALLATIONS 1 Electrical Flashing Panels Plumbing/HVAC Flashing Panels 2 • Effectively seal plumbing, electrical, and HVAC penetrations from rain • Suitable for residential and commercial applications • Designed to work under wood and vinyl siding, stucco, brick and stone veneers • Easy and quick installation • Eliminate the use of unreliable caulk • Panels are made of high-grade polyethylene plastic and thermo plastic rubber
Rain Screen HOME SLICKER™ RAIN SCREEN Home Slicker Rain Screen • Benjamin Obdyke Product • Rolls are 39" x 46'; 150 sq ft of coverage • 0.25" thick three-dimensional Nylon matrix provides a space for continuous drying • 2 drainage channels per inch • Use under wood, stucco, EIFS systems, brick and stone veneers or vinyl • Quick, easy installation. 50 year limited warranty 3580.
Water Conservation Products MASSAGING ADJUSTABLE SHOWERHEADS • 2.0 gpm or less at 80 psi • High-impact plastic body; white or chrome finish • Adjustable non-aerating spray and pulsating spray When the shower is initially turned on the ShowerStartTM device monitors the water temperature. When the water temperature reaches bathing temperature, (95°F / 35°C), the conservation mode is activated and the device “triggers a trickle”.
Ventilation Fans Dimensional Information FANTECH FR SERIES IN-LINE FANTECH RVF SERIES WALL-MOUNTED FANTECH FG SERIES IN-LINE MODEL *A1 C D E FG 4/FX 4 4 8.75 6.5 1 F 1 FG 4XL/FX 4XL 4 9.75 6.937 1 1 FG 5/FX 5 5 8.75 5.5 1 0.875 FG 5XL/FX 5XL 5 9.75 5.937 1 1 FG 6/FX 6 6 11.375 6 1 1 FG 6XL/FX 6XL 6 13.125 6.625 1 1 FG 8/FX 8 8 13.375 6 1.125 1.125 FG 8XL/FX 8XL 8 13.375 6 1.125 1.125 FG 10/FX 10 10 13.375 4.687 1.125 1 FG 10XL/FX 10XL 10 13.
Ventilation Fans Dimensional Information PANASONIC AND BROAN FAN ONLY UNITS MODEL A B C D E 13" 13" PANASONIC AND BROAN FAN-LIGHT UNITS Panasonic Whisper Green — No Light All Models 10.25" 10.25" 7.875" MODEL 10.25" 10.25" 7.875" 13" 13" All Models 10.25" 10.25" FV-08VQ3 10.25" 10.25" 7.875" 13" 13" FV-11VQ3 10.25" 10.25" 7.875" 13" 13" All Models FV-11VQD2 9.125" 9.125" 7.875" 11.875" 11.875" FV-15VQ4 10.25" 10.25" 7.875" 13" 13" FV-11VHL2 FV-20VQ3 12.
Policies and Procedures The staff of EFI’s Wholesale Division looks forward to working with our customers to provide the highest quality, energy efficient products available at competitive prices. We ship orders throughout the United States Monday through Friday from two warehouse locations: Westborough, Massachusetts and Greenville, Wisconsin. Ordering Information Our hours of operation are from 8:00 am to 5:00 pm (Eastern Standard Time in MA and Central Standard Time in WI), Monday through Friday.
Mission Statement We believe it is essential to encourage environmentally benign and sustainable use of our planet’s limited energy and water resources. Through the distribution of resource conserving products and the provision of objective, accurate information, we strive to assist people in their efforts to use energy and water efficiently, leading to improved quality of life and economic condition.
