Specifications

SF
6
Portable Monitor
8 Instruction 3015-5150
2 Specifications
Product Type ........................ Portable SF
6
Gas Monitor
Measuring Range ................. 0 to 1,000 ppm
Warm-Up Time .................... 5 minutes
Detector Type ....................... Infrared, Non-Dispersive
Sensitivity ............................ 1 ppm
Accuracy ............................... ±1 ppm
Response Time ..................... 90% of response within 3 seconds; 100% in 5 seconds
Temperature Drift ............... 1.5 ppm per °C between purge cycles
System Noise ....................... Less than 40 dB(A) at 10 ft (3 m)
Operating Temp ................... 32 to 122°F (0 to 50°C)
Ambient Humidity ............... 5 to 90% RH (non-condensing)
Altitude Limit ...................... 6,562 ft (2,000 m)
Power .................................... DC power pack, provides 8–12 hours of operation
Power Consumption ............ 15 Watts
Front Panel .......................... 3 Indicator lights:
ON – Green LED flashes during warm-up, and then glows steady
during normal operation
FAULT – Yellow LED flashes when there is a system fault
ALARM – Red LED flashes when the gas level is above its alarm setting
Audible Alarm ..................... Internal audible alarm programmable for any of the following conditions:
OFF, FAULT/ALARM, ALARM
Dimensions (DxLxW) .......... 9” x 14.5” x 5” (229 x 368 x 127 mm)
Weight .................................. Less than 9 lbs (4 kg) including battery
Valid Calibration Period
to Specifications ................... 12 months
Warranty .............................. 2 Years from date of shipment