Specifications

LOCATION AND

ESCRIPTION OF

NIT FEATURES

1. Purge Ball Valve This valve determines what function the Model 3600-R410A performs. This valve is UP

during recovery operations and DOWN for purging and liquid push-pull operations.

2. Inlet Port Ball Valve Opens or closes the inlet port. It is pointing UP (open) for all recovery operations and points

DOWN for purging operations.

3 LED Status Display See the description on the following page.

4 System Switch When in the ON position, this switch starts the recovery operation by turning the

compressor on.

5. Outlet Port Ball

Valve

Opens or closes the outlet port. It points DOWN when it is open and to the left when

CLOSED.

6 Inlet Port Refrigerant hose connection for incoming refrigerant vapors.

7 Outlet Port Refrigerant hose connection for outgoing refrigerant.

8. Outlet Pressure

Gauge

Displays the outlet/discharge pressure.

9. Inlet Pressure

Gauge

Displays the inlet/suction pressure of the system being evacuated.

Umbilical Cord -

Optional Accessory

(Not shown)

This optional accessory connects to the recovery cylinder overfill sensor and automatically

shuts the Fluoromizer unit off when the recovery cylinder reaches the 80% liquid fill limit.

NOTE: If the Model 3600-R410A is equipped with an 80% shutoff cord, it will not work

unless it is not connected to a DOT recovery cylinder with a compatible level float switch. If

the recovery cylinder does not have a float switch, a shorting cap must be installed in order

to operate the system.

Compressor Circuit

Breaker (not shown)

Protects against high amperage. Located on the left side of the machine.