Specifications

BACHARACH
®
| 1.800.736.4666 | www.bacharach-inc.com
25
Analyzers & Monitors
Monoxor
®
II
Carbon Monoxide Analyzer
Bacharach’s Monoxor
®
II CO Analyzer is a hand-held instrument designed to locate CO in
ambient air as well as stack gases. The continuous sampling instrument quickly and
accurately measures levels of CO between 0 and 2,000 ppm. The Monoxor
®
II has a
stainless steel probe with four feet of tubing to sample CO found in flue gases of residential
furnaces, combustion appliances, commercial and industrial boilers.
With the addition of the Breath Analysis Module (BAM) to the Monoxor
®
II, it becomes a
powerful tool in determining the presence and level of CO in the bloodstream.
The Monoxor
®
II is also available in a high range version (0-80,000 ppm) for vehicle
emissions testing and forklift tuning.
FEATURES
• Quickly measures and displays low levels of
CO 0-2,000 ppm
• Measurement resolution of 1 ppm
• Multi-purpose strap for easy holding
• Probe and hose assembly for flue gas testing
• Highly visible digital display with backlight
APPLICATIONS
• CO safety checks on combustion stack gas
and ambient air levels
• Analyzing indoor air quality and safety
• Furnace and boiler servicing or replacement
• BAM verifies CO exposure
MONOXOR
®
II BAM
BREATH ANALYSIS MODULE
A NON-INVASIVE DETERMINATION
OF CARBON MONOXIDE (CO)
IN THE BLOODSTREAM (COHB)
• Attaches to Monoxor
®
II CO Analyzer
• Backlit, digital display of CO with conversion chart for % COHb
• No Factory Retrofit needed
• Disposable mouthpiece and balloon for sanitary operation
• Measures breath CO in less than one minute
• Adds complete CO first response capability to your Monoxor
®
II
• Replenishment kit available for disposable components
• Non-invasive on-site test results
ORDERING INFORMATION
PART NO. DESCRIPTION
19-8004 Monoxor
®
II CO Analyzer with case
19-8014 Monoxor
®
II with CO Breath Analysis Module
19-8011 Breath Analysis Module (BAM)
19-8015 Monoxor
®
II High Range (0-80,000 ppm)
24-0519 Replacement CO sensor, Monoxor
®
II
19-3084 Probe and hose assembly
19-0441 Adjustment screwdriver
11-0121 Filtering material (for water trap)
24-7059 Calibration kit (without CO gas)
24-0492 CO Gas Cylinder, 500 ppm (for use with 24-7059)
51-1994 CO Gas Cylinder, 100 ppm (for use with 24-7059)
19-8012 BAM Replenishment kit, 30 mouthpieces,
30 balloons and 10 filter disks
19-0435 BAM Mouthpiece & balloon, 1 each per pkg.
19-0431 Filter disks
19-0444 RFI Protective Pouch
19-8022 Probe & hose repair kit
19-8016 Replacement CO Sensor, Monoxor
®
II High Range