Operating instructions

Operation PEM-9004
Teledyne Analytical Instruments 46
4.5.3 Pressure
The pressure program can be started by pressing F2 from the
Measurement screen.
Available functions from within the pressure program are:
Hold: Freezes the current pressure readings.
Max/Min Reset: Resets the current pressure readings.
Print: Prints out the currently displayed pressure screen
Cycle button: Change units (°C or °F).
ENTER button: Reset the pressure to zero.
The following units fo r pr e ssure can be selected:
hPa,
mbar,
mmWC (millimeter water column)
mmHg (millimeter mercury column)
inWC (inches water column)
inHg (inches mercury column)
Psi (pounds per square inch)