Operating instructions

Portable Emissions Analyzer Operation

Teledyne Analytical Instruments 33

Take (F3): Transfers the draft value to the Flue Gas menu.

Note: To determine the zero point in relation to the surrounding

air pressure, unplug the air tube (with the blue connector)

before every draft measurement. Then press the F2 button

and connect the air tube again.

Cycle button: Scroll line by line through the available

functions within the Flue Gas menu.

4.5.1.2 INFO

Pressing the Info button launches the Info screen which displays

important fuel parameters, current sensor status and the O

reference

value.

Function buttons active in this menu are:

Cycle: Change values in the various fields.

Change Layout: Opens the sensor status screen as shown below.

CLEAR: Close the Info screen