Operating instructions

Operation PEM-9004
Teledyne Analytical Instruments 26
4.4.3 Settings
The Settings screen is used to set the following instrument
parameters:
•
Units used for draft and pressure
•
Sound off/on
•
Printer
•
User address
•
Automatic shut down of the instrument and display
illumination
Pressing F3 from the Configuration menu brings up the Settings
screen.
4.4.3.1
UNITS FOR DRAFT AND PRESSURE
• Use the cycle button to highlight the Draft/Press line on the
screen.
•
Use the arrow keys to toggle between the available units.
When the desired unit appears, press OK.
4.4.3.2 INSTRUMENT SOUND ON/OFF
• Use the cycle button to highlight the Sound line on the screen.
•
Use the arrow keys to cycle between Yes (ON) and No (OFF).
•
Press OK to save the setting.