Specifications

Overview Monoxor

Plus Manual
2 0019-9370 Rev 0
CAUTION: This analyzer is not
intended to be used on a
continuous basis.
CAUTION: Do not store instrument or its sensors with solvents or
products that contain solvents.
CAUTION: Except for sensor and battery replacement
, this
analyzer should only be opened and/or serviced by authorized
Bacharach personnel. Failure to comply may void the warranty.
HAZARDOUS AREA WARNING:
This instrument has not been
designed to be intrinsically safe for use in areas classified as
hazardous locations. For your safety,
DO NOT use it in hazardous
(classified) locations.
CAUTION: Do not use flammable or combustible substances (like
carburetor fluid used for cleaning the probe) near an open flame.
CAUTION:
When the instrument is used in an inefficient oil-fueled
appliance where there is a high emission of soot, the probe’s
sample filter may become clogged. Before every use check the
filter to confirm it is clean or replace it with a new filter.
To prevent soot intake and a clogged filter, a smoke test should be
performed before operating under such conditions. This ensures
that the furnace or boiler is burning at a level appropriate for the
use of this instrument.
1.4. Product Overview
The Monoxor

Plus is a portable hand-held carbon monoxide analyzer for use
in residential and light commercial applications. It is intended to be used by:
• HVAC contractors
• home inspectors
• maintenance personnel
• safety inspectors
to detect and display concentrations of carbon monoxide (CO) gas between
0 and 2000 ppm. The analyzer is capable of testing for CO in both ambient
room air and in the flue-gas stream of fossil-fuel fired furnaces and boilers.
A backlight enables the operator to read the display in dimly-lit areas. The
displays and menus are available in multiple languages (English, French and
Spanish).
www.GlobalTestSupply.com
Quality Bacharach Products Online at: [e-mail]