Specifications

Monoxor

Plus Manual Operation
0019-9370 Rev 0 37
The Monoxor

Plus provides three lines of 20 characters for user information.
This information will appear with test records when they are printed. User
name and optional information are entered via software menu selections in the
SETUP MENU or via the Fyrite

User Software (FUS).
In addition to the three lines of text, the Monoxor

Plus can be setup to include
a custom logo on printouts. Logos are loaded into the instrument using the
Fyrite

User Software (FUS). Logo size is limited to 192 x 384 pixels (height x
width) and must be in one of the following formats: .BMP, .JPG, .PNG, or .TIFF.
For best results, the logo should be saved in black and white.
4.9. Turning Off the Analyzer
Turn OFF the analyzer by pressing the power button and holding for
approximately 2 seconds. The analyzer will count down from 5 seconds before
turning OFF. Pressing ENTER, however, will abort the count down and keep the
analyzer ON.
4.10. PC Interface and Fyrite

User Software
A PC with Fyrite

User Software (FUS) installed can set, edit, and transfer the
following:
• instrument time and date
• calibration password
• time meters
• B-SMART

code
•
user name
• instrument settings
• customer logo
• firmware updates
• language.
∇ ∇ ∇
www.GlobalTestSupply.com
Quality Bacharach Products Online at: [e-mail]