Specifications

Monoxor

Plus Manual Setup
0019-9370 Rev 0 13
NOTE: A Set Clock error message
will be displayed if the
instrument is without power for an extended period of time.
2.4. Turning On the Monoxor

Plus
To turn on the Monoxor

Plus, press the PWR button.
NOTE: After turning on the Monoxor

Plus, it performs a warm-up
procedure which includes an auto-zero procedure (when in Auto
Zero mode) for the sensors (see pages 14 and 25
). For this reason,
be sure to turn on the Monoxor

Plus in a clean air environment.
When the analyzer is in CO Manual mode, the analyzer will
indicate the background CO during startup.
∇ ∇ ∇
www.GlobalTestSupply.com
Quality Bacharach Products Online at: [e-mail]