Specifications

Monoxor

Plus Manual Setup
0019-9370 Rev 0 10
Section 2. Setup
2.1. Connecting the Probe
A rigid stainless steel probe with handle is connected to a flexible hose with an
integral water trap/filter and is used to draw a gas sample into the analyzer
from the room, grilles, diffusers, and furnace flues.
1. Inspect the flexible hose for cracks. If a hose is defective, replace the entire
probe assembly.
2. Before using the analyzer, check that the water trap/filter is clean and dry.
If necessary, dry out the trap and replace the filter element.
3. Push the probe’s “sample gas” tubing onto the GAS inlet connector.
www.GlobalTestSupply.com
Quality Bacharach Products Online at: [e-mail]