Owner's Manual

PCA

3 Manual
0024-9472 Rev 2 39
1. Display the MAIN MENU by pressing the MENU (F2) button. If
necessary, press ESC until MENU appears above F2.
2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight RUN/HOLD FORMAT, and then press
ENT to display Run/Hold Format Menu.
4. Use the ▲▼ buttons to highlight RESET FORMAT, then press ENT to
display the Reset Format screen.
5. Use the ▲▼ buttons to select YES, then press ENT to reset the display
and return to the Run/Hold Format screen.
Figure 4-21. Resetting Display Formats Back to Factory Defaults