Specifications

Multi-Zone Gas Monitors
P/N: 3015-5074 Rev 10 3
1.4. Key External Hardware Components
Figure 1-1. Multi-Zone Monitor Front View
NOTE: Mounting cutouts are located on the back of the monitor, and are visible from
inside the Multi-Zone monitor. A mounting template is also shipped with the monitor. For
mounting information, refer to the mounting instructions on page 8.
Standard Accessories for a 4-Point System
QTY Description Part Number
5 Line-End Filters 3015-3420
1 Charcoal Filter (Halogen Gas Monitor Only) 3015-3125
3 End-of-line Water-Stop Filter Assembly 3015-5512
1 T-Bolt Bracket (Halogen Gas Monitor Only) 3015-2969
1 Multi-Zone Instruction Manual 3015-5074
1.5. Functional Overview
1.5.1. General Description
Gas monitors are specified to support compliance to federal, state and local safety codes governing
emissions. Avoiding significant loss reduces equipment replacement costs, maintains equipment efficiency,
promotes safety, and protects the environment.
The Bacharach Multi-Zone Monitor provides continuous monitoring of gas levels in up to 16 separate test
zones. The instrument is easily programmed to monitor a variety of gases (dependent on particular model)
and independent leak (small), spill (medium), and evacuation (large) levels may be designated for each
zone. The instrument also retains a log of previous readings that can be easily accessed for analysis.