Specifications

Multi-Zone Gas Monitors
P/N: 3015-5074 Rev 10 39
4.5.7. Viewing Fault Log
A data log of the last 20 fault conditions is retained in memory. On the Fault Screen, select the LOG option
to view a display of the fault log.
Figure 4-8. Fault Log Screen
This screen lists potential fault conditions in the left column and displays a check mark indicating which
problems were associated with each fault condition as represented by the vertical cursor bar. As you move
the bar horizontally using the LEFT/RIGHT cursor keys, the date and time the fault condition was detected is
displayed in the upper right hand corner of the display window.
NOTE: Anytime the fault status changes, there is an entry in the fault log, both when the
fault occurs and when it is cleared.
NOTE: The Fault Log can be reset by pressing a combination of the ENTER and RIGHT
arrow buttons while viewing the log.
4.5.8. Viewing Flow Log
On the Fault Log screen, press ENTER to access the Flow Log screen. The Flow Log displays the last 20
flow events for all zones and the purge port.
UP/DN KEY TOGGLES ZONES
ZONES 1 - 8
Figure 4-9. Flow Log Screen