Specifications

Halogen Gas Monitor – Multi Zone
Instruction 3015-5074 33
Responding to Alarms
An operator can respond to the alarms by accessing the Alarm Summary Screen. Navigate to this screen by
selecting ALARM on the first (Data Display) screen.
Alarm Summary Screen
The Alarm Summary Screen displays a list of all alarm conditions pending across the network. The screen is
divided into 8 boxes, and each box represents a single alarm. If more than 8 alarms are pending, the MORE
option will be displayed at the bottom of the screen to permit access to that additional information.
Each box displays the zone number, zone name, and the current PPM reading. A flashing box indicates an
alarm that has not been acknowledged. A static box represents an alarm that has been acknowledged but
has not yet been cleared from the system.
The Alarm Data Log can be reset by pressing a combination of the ENTER and RIGHT arrow buttons while
viewing the log.
Alarm Detail Screen
To further investigate an alarm, press the ENTER key to go to the Alarm Detail Screen.
Alarm Detail Screen
The Alarm Detail Screen displays more comprehensive information about the nature of the alarm including:
• Complete location information
• Gas type and current concentration (CONC NOW)
• Peak concentration and peak time
• Type of alarm, alarm time, and date