Specifications

Halogen Gas Monitor – Multi Zone
Instruction 3015-5074 25
3 Setup Programming
Display Screens
Initial Power Up
When the HGM-MZ is powered up, all front level panel LEDs will illuminate and a splash screen will
appear, displaying the monitor’s firmware version level. After a moment, the Warm Up screen will be
displayed and the green MONITOR ON light will blink.
After a 15 minute warm up cycle, the MONITOR ON light will glow steadily and the Data Display screen
will be displayed. (See Appendix C for an overview map of the screens in the system.)
Data Display Screen
Navigating to the 1
st
Setup Screen
• Use the UP/DOWN arrow keys to select the first text box to access the Setup screen.
• Press ENTER to select.
HGM System Setup Screen #1