Specifications

Halogen Gas Monitor – Multi Zone
Instruction 3015-5074 13
Sample intake lines can be up to 1,200 feet when no exhaust tubing is used. Otherwise, the combined length
of the sample line and the exhaust line cannot exceed 1,200ft.. All line terminations should be positioned to
reduce the possibility of mists, aerosols, oil, water, dust, or other contaminates being drawn into the
instrument. A line-end filter (P/N 3015-3420) should be attached to the end of each sample intake line. Line-
end filters should be placed 12" to 18" above the floor.
IMPORTANT: DO NOT block any of the zones. Unused zones may be disabled by setting their length
parameter to zero feet in the zone setup screen.
Please refer to the earlier section Suggested Location of Sampling Points to learn more about where to place
the ends of the sample intake lines.