Specifications

Ammonia Gas Monitor – Multi Zone

Instruction 3015-5113

7. Go to EDIT. From the EDIT Menu, select ZONES. Select a specific zone to identify and set

parameters. Make a selection from the gas library for that zone.

8. Setting the Alarms: Select EVAC LEVEL. Use the Backspace key to clear previous setting. Type in

the new PPM level. Use the same method to set the spill level and leak level.

9. To close or bypass a zone: Set the DISTANCE to 0 feet.

IMPORTANT: When a modified parameter (zone, system or calibration) is sent to the AGM-MZ,

please wait for the computer software to indicate that the download is complete before continuing

with any further edits.

Saving & Sending Programs

 When saving to your computer, the program will automatically add “.cfg” to the filename you have

entered.

 To send a saved program to the AGM-MZ, open the program and connect the PC to the AGM-MZ.

From the AGM, select SEND SETUP and press Enter. The saved program will be sent to the AGM-

MZ.

Trend Data

Creating a trend data file must be done while connected to the AGM-MZ.

From the computer, select GET TREND DATA. Select the zone that you want to trend and press Enter. The

trend data will appear in a list format. Press Enter again to access the file name screen. Type in the file

name for that zone. Press Enter. The file will be saved as a text file that can be converted to an Excel file or

printed as is.

NOTE: The TREND file must be saved Zone by Zone, with a filename per zone.

Converting the TREND Text File to a Microsoft Excel File

Open Excel and the desired file. Select “Delimited” format and “Space” as the delimiter. Select “General” as

the column data format. The text file will display as an Excel file. When saving, change the file name

extension to “.xls”. Comments or notes may be added to this file as needed and saved.

Saving & Printing the AGM-MZ Software Screen, Alarm Log,

Fault Log, or Diagnostic Screen

Open the software while connected to the AGM-MZ. After the software receives the program, open the

desired screen. Use the Alt and Print Screen key combination on the PC keyboard to capture the image and

paste it into a Word document. Save and print.

USB Type Laptops

Some laptops have USB ports and no RS-232 9-pin ports. A USB to RS-232 converter must be purchased

to provide an RS-232 output. We recommend the converter manufactured by:

SEALEVEL SYSTEMS, INC.

155 TECHNOLOGY PLACE

P. O. BOX 830

LIBERTY, SC 29657

PHONE – 864-843-4343

www.sealevel.com

Model# 2105

A “straight through” RS-232 cable and a DB25 to DB9 adapter will be required to connect the laptop to

the AGM-MZ.