Instruction manual

Microprocessor Module Replacement Kit for Multi-Zone Leak Monitors
6 3015-5547 Rev 3
Figure 5. Sampling Mode Screen with Key Functions
c. Scroll to the bottom right of the screen (see Figure 6) to select the ‘Service Mode Entry’ option.
Figure 6. Main Setup Screen Showing Location of Service Mode Entry Option
d. With the ‘Service Mode Entry’ option highlighted, press ENTER twice to enter Service Mode.
e. Scroll to the “SYSTEM” option and press ENTER.
f. Scroll to the “MORE” option (see below) and press ENTER. Note that “MORE” will flash when it is selected.
Figure 7. HGM Setup Screen Showing “MORE” Option
g. Scroll to and select the “Model” option (see below) and press ENTER.