Specifications

Instructions 77-9045 Bacharach, Inc. Page 1-1
CD3 AUDIT KIT INTRODUCTION
DEAD WEIGHT
TESTER
GRADUATED
CYLINDER
SPLASH
SHIELD CUP
VISCOR
CUP
TEST
GAUGE
DUMMY
INJECTOR
GAUGE TOOL
LOAD CELL
TEMPERATURE
TRANSDUCER
INDICATOR
TUBING
HOSE
• Clamp force and temperature indicator*
• Temperature transducer assembly*
• Load cell assembly*
• Rail pressure gauge adjusting tool
• Graduated cylinder
• Tubing with quick connects
• Splash shield cup
• Hose
---------------
*The clamp force and temperature indicator is
calibrated with its load cell and temperature
transducer. (They are calibrated, the serial num-
bers recorded, and become a matched set at the
factory.) If the load cell or transducer are replaced,
the clamp force and temperature indicator must be
recalibrated.
1.0 INTRODUCTION
The Bacharach Injector Calibrator Model CD3
calibrates and tests mechanical unit injectors
manufactured by Diesel Technology Corporation
(used in Detroit Diesel engines (DD)) and by
Cummins Engine Company. The CD3 has been
adjusted, set, and tested at the factory to ensure
accurate test results. It is a precision machine and
must be handled accordingly.
To maintain the calibrator at its peak performance,
Bacharach provides an Audit Kit for checking most
critical components and systems.
The Audit Kit consists of the following items:
• Dead weight tester
• Test gauge set
• Viscor cup with its associated instructions and
chart
• Dummy injector assembly
Figure 1-1. Audit Kit