Specifications

TECHNICAL DATA AND FEATURES
• Synchronous drive motor
• Digital fuel measurement
• Floor standing unit; full welded frame construction
• Operating speeds: 1050 RPM (Cummins), 2000 RPM (DD)
• Cast iron cambox with tapered roller bearings and quick change cam capability
• Injector clamping: hydraulic
• Calibration fluid reservoir capacity: 8 U.S. Gallons (30 liters)
• Filtration:
- Primary filter (spin-on type): 10 micron
- Final stage filter: 3 micron
- Flowmeter transducer: screen
• Calibration fluid temperature control:
- Solid state control
- 104°F
+ 1°F (factory setting)
- Cooling by cold tap water
- Heating by two 500 watt immersed electric heaters
• Instrumentation & Controls:
- Injector Supply (Rail) Pressure Gauge, 4" Dial, Scale: 0-200 psi.
- Calibration Fluid Temperature Gauge, 4" Dial, Dual Scale: 40-140°F (5-60°C).
- Supply pressure regulator
- Clamping pressure regulator
- Main drive start, stop switches
- Measurement system start switch
• Measurement System:
- Positive displacement Flowmeter (U.S. Patent No. 4141243)
- Measurement Units - mm
3
/str.
- Digital display resolution - 0.1 mm
3
/str.
- Measurement sampling - 50 or 100 strokes
- Stroke counter - electronic/optical
- Accuracy: + . 75% of reading or 1 mm
3
/str. whichever is greater
Instruction 67-9319 Bacharach, Inc. iii