Owner's Manual

GDX-350 Sensor Transmitter
18 P/N: 5600-9001 Rev 2
Figure 2-2: Outline Drawing (Stand-alone and Wired Version)
2.2.2 RF Wireless Networks
The standard enclosure for the RF version of the GDX-350 is a cast aluminum explosion-proof (NEMA 7)
enclosure as shown in Figure 2-3. Modular design simplifies the installation. The RF antenna should
typically be mounted with “line of site” access to the controller’s base station antenna. If a good “line of
site” angle is not possible the GDX-350s will usually still function properly at ranges up to 1500 feet, but
obstructions should be kept to a minimum.