Specifications

Instruction 0024-9435
23
Fyrite Tech
4.8.3 O
2
Screen (Model 50 only)
The O
2
display is the measured percentage of oxygen present in the fl ue-
gas stream.
Front Panel Button Functions:
 /  – Scrol through Run Mode Screens (refer to Section 4.7)
ENTER – Hold for 2 seconds to display Fuel Screen
HOLD – Freezes display (press ENTER to unfreeze)
LIGHT – Toggles backlight ON/OFF
I/O – Turns analyzer OFF (with a 5 second delay)
4.8.4 CO & O
2
Screen (Model 60 only)
The CO display is the measured ppm amount of carbon monoxide pres-
ent in the fl ue-gas stream. Note, however, that the amount of CO dis-
played may be diluted by secondary air (refer to Section 4.8.5 CO Air Free
Screen).
The O
2
display is the measured percentage of oxygen present in the fl ue-
gas stream.
Front Panel Button Functions:
 /  – Scroll through Run Mode Screens (refer to Section 4.7)
ENTER – Hold for 2 seconds to display Fuel Screen
HOLD – Freezes display (press ENTER to unfreeze)
LIGHT – Toggles backlight ON/OFF
I/O – Turns analyzer OFF (with a 5 second delay)