Specifications

Instruction 0024-9435
11
Fyrite Tech
1. If not already done, enter Setup per Section 3.5.1. Repeatedly press
EN TER until the fi rst Time Setup Screen is displayed - the one with
two bars over the hour digits.
2. Press the  or  button until the correct hour value is displayed.
3. Press EN TER to move the selection bars over the minute digits.
4. Press the  or  button until the correct minute value is displayed.
5. Press EN TER to move to next Setup Screen, or press I/O to exit
setup.
3.5.5 Date Setup (Model 60 only)
There are two Date Setup Screens, each labeled, "DAtE". The fi rst screen
sets the month while the second sets the day.
1. If not already done, enter Setup per Section 3.5.1. Repeatedly press
EN TER until the fi rst Date Setup Screen is displayed.
2. Press the  or  button until the correct month is displayed.
3. Press EN TER to change the 'Day' value.
4. Press the  or  button until the correct day is displayed.
5. Press EN TER to move to next Setup Screen, or press I/O to exit
setup.
3.5.4 Year Setup (Model 60 only)
The Year Setup Screen is labeled "YEAr".