Specifications

Instruction 24-9388

Fyrite Pro

5.8 Water Trap / Filter Maintenance

The Water Trap / Filter Assembly removes water condensate from the gas

sample, and also prevents soot from contaminating the internal compo-

nents of the analyzer.

Drain the water condensate after every test.

Procedure:

1. Pull off the Inlet End Cap using a slight twisting motion.

2. Pour out all water condensate; then reassemble trap.

Replace the Filter Element when dirty.

Material Required: • Filter Element, P/N 07-1644

Procedure:

1. Pull off the Outlet End Cap using a slight twisting motion.

2. Remove and discard old filter.

3. Install new filter; then reassemble trap.

Figure 5-3. Water Trap / Filter Assembly

OUTLET

FILTER ELEMENT

To re place Filter Elemen t,

pull off Outlet End Cap using

a slight twisting motion.

To empty Water Trap,

pull off Inlet E nd Cap using

a slight twisting motion.

INLET