Specifications

Instruction 24-9388
22
Fyrite Pro
4.8 Printing Test Data
Turn ON the printer. Refer to the printer’s instruction manual for detailed
operation and maintenance information.
If not already done, set the printer parameters as follows:
• Data: 8 bits
• Baud: 9600
• Parity: None
• Handshaking: X-on/X-off
Align the printer with the top of the analyzer as shown in Figure 4-1.
The next step in the printing procedure depends on whether the operator
desires to print only the current test data, or all stored test data starting
with the most recent. Perform the appropriate procedure below:
Print Current Test Data
1. With the analyzer in its Run Mode, press the HOLD button twice to
display the Print Screen.
2. Press ENTER to start printing.
Print All Test Data
1. With the analyzer in its Run Mode, press the HOLD button twice
to display the Print Screen. Then press the  button to display the
Print All Screen.
2. Press ENTER to start printing.