Specifications

Instruction 24-9388
21
Fyrite Pro
2. Press the  button once to display the Save Screen. The number
shown in this screen represents the memory location (1 thru 10) to
which the current test data will be saved.
3. Press ENTER to save the test data and return to the Hold Mode, or
press HOLD to return to the Hold Mode without saving.
4.7 Opening and Viewing Saved Test Data
Perform the following to open and view saved test data:
Note: If no test data has been saved, the option to open the
memory for viewing will not be available.
1. If the analyzer is in its Run Mode, press the HOLD button twice to
enter the Print/Memory Menu Screens. If the analyzer is already in
its Hold Mode, press the HOLD button only once. The first menu item
displayed is the Print Screen.
2. Press either the  or  button until the Open Screen is displayed,
and then press ENTER to open the memory locations for viewing.
The number shown in the second screen represents the most recent
memory location where data was stored.
3. Press either the  or  button to scroll to the desired memory loca-
tion, and then press ENTER to recall the stored data and return to
the Hold Mode. While in the Hold Mode, the recalled data can be
viewed using the  and  buttons, or printed per Section 4.9.