Specifications

Instruction 0024-9460

Fyrite

INSIGHT

DISPLAY ZOOM - Combustion test data in the Run/Hold screens can be

shown with enlarged characters to make viewing easier. The complete

list of Run/Hold data can be scrolled through for all zoom levels. Available

zoom levels and information display are as follows:

• Standard - 4 lines of information

• 2X - 3 lines of enlarged characters

• 3X - 2 lines of enlarged characters

STATUS - A status menu displays the instrument software version, boot

version, model number, and serial number.

DIAGNOSTICS - The diagnostics menu displays the O2 sensor life, CO

sensor information, and hours of operation for the instrument and the

pump.

KEYPAD SOUND - Keypad sounds can be enabled or disabled with soft-

ware menu selections.

LOW BATTERY - A tone will sound every 10 seconds when a low battery

condition exists. A low battery message will also be displayed.

AUTOMATIC POWER DOWN - The instrument can be set to automati-

cally power off after a period of inactivity unless the user presses any but-

ton; the CO is greater than 50 ppm, or the O2 is less than 16.0%. Auto-

matic power down can be set for None, 30, or 60 minutes.

PURGE - The sensors will be purged when the instrument is shutdown

until sensor outputs indicate that they have been exposed to fresh air.

Pressing the On/Off key a seconds time can defeat the purge routine. The

minimum purge time can be set to None, 5 seconds, 1 , 5, or 10 minutes.

SENSOR ACCESS - Sensor replacement can be accomplished in the ﬁ eld.

Easy access to the O2 and CO sensors is provided through the back of the

instrument.

POWER - The Fyrite

INSIGHT is powered by 4 AA alkaline batteries. A

new set of alkaline batteries will provide a minimum of 20 hours of con-

tinuous operation with the pump running and the back light on. Option-

ally, the analyzer can operate with a universal AC adapter. When the AC

adapter is plugged into the unit, batteries do not have to be removed.