Specifications

Instruction 0024-9460
30
Fyrite
®
INSIGHT
4.14 Printing Test Data
Combustion, pressure, or temperature data that is currently being dis-
played can be sent to a printer using IrDA protocol as described below.
Data that is stored in memory can also be printed by first displaying the
stored test data as described in Section 4.13.
In addition to printing combustion, pressure, and temperature data, the
contents of any screen that shows the label “PRINT” above the F1 button
can be printed. For example, the information shown in the DIAGNOSTIC
screen can be printed.
1. Power up the printer.
Refer to the printer’s
instruction manual for
detailed operating infor-
mation. If not previously
done, select the follow-
ing for the printer for:
• 8 bit
• No parity
• 9600 baud
• IrDA is set to
IrDA-SIR
• DTR
handshaking
2. Align the printer with
the top of the analyzer.
3. Press the PRINT (F1)
button to begin print-
ing.
F1
F2
F3
ESC
RUN
HOLD
PWR
BACHARACH, INC.
Fyrite Insight
SN: ENGR-CM03
Time: 01:28:27 PM
Date: 10/22/08
Fuel
Nat Gas
O
2
4.0 %
CO 12 ppm
Eff
82.6 %
CO
2
9.5 %
T-STK 374
o
F
T-AIR 68.0
o
F
EA 21.3 %
CO (3) 13 ppm
Comments:
Fig. 4.2