Specifications

Instruction 0024-9460

Fyrite

INSIGHT

Change the order in which data is displayed as follows:

1. Enter the SETUP MENU per Section 3.5.1. If necessary, press ESC

until MENU appears above F2.

2. Use the ▲▼ buttons to select RUN/HOLD

FORMAT. Press ENTER to display the

Run/Hold Format options.

3. Use the ▲▼ buttons to select EDIT FOR-

MAT. Press ENTER to display the current

format.

4. Change data for a particular location by

ﬁ rst using the ▲▼ buttons to select the loca-

tion. Press ENTER and the cursor will start

to ﬂ ash.

5. Use the ▲▼ buttons to scroll through and

select the desired data to appear in that

location. Press ENTER to save the selection.

6. Change the data displayed at other locations

by repeating steps 4 and 5

7. When ﬁ nished, use the ▲▼ buttons to select EDIT COMPLETE,

located at the bottom of the list. Press ENTER to save the new dis-

play format and return to the Run/Hold Format options.

Reset Display format back to factory default settings as follows:

1. Enter the SETUP MENU per Section 3.5.1.

If necessary, press ESC until MENU ap-

pears above F2.

2. Use the ▲▼ buttons to select RESET FOR-

MAT. Press ENTER to display the Reset

Format option.

3. Use the ▲▼ buttons to select YES. Press

ENTER to reset the format and return to the

Run/Hold format options.