Specifications

Instruction 0024-9460

Fyrite

INSIGHT

3.5 Setup Mode

The analyzer is preset at the factory for the parameters shown below, but

can be changed as described in their corresponding sec tions.

Function Parameter To Change

Fuel Natural Gas Section 4.3

Temperature Unit °F Section 3.5.2

Pressure Unit InWC Section 3.5.3

Language English Section 3.5.10

CAL Reminder Never Section 3.5.12

Clock Not Initialized Section 3.5.4

3.5.1 Entering Setup

1. Display the MAIN MENU by pressing the

MENU (F2) button.

2. Use the ▲▼ buttons to highlight SETUP

and press ENTER to display the SETUP

MENU.

3.5.2 Temperature Units

Select to display temperature in either ºF or ºC as follows:

1. Enter the Setup Menu per Section 3.5.1. If necessary, press ESC

until MENU appears above F2.

2. From the SETUP MENU, use the ▲▼ but-

tons to select TEMPERATURE UNITS.

Press ENTER to display the Temperature

Units Menu.

3. Use the ▲▼ buttons to select the desired

temperature unit.

4. Press ENTER to save selection and return

to the SETUP MENU or ESC to revert the

previous setting.