Specifications

Overview Monoxor

Plus Manual
2 0019-9370 Rev 0
CAUTION: This analyzer is not
intended to be used on a
continuous basis.
CAUT
ION: Do not store instrument or its sensors with solvents or
products that contain solvents.
CAUTION: Except for sensor and battery replacement
, this
analyzer should only be opened and/or serviced by authorized
Bacharach personnel. Failure to comply may void the warranty.
HAZARDOUS AREA WARNING:
This instrument has not been
designed to be intrinsically safe for use in areas classified as
hazardous locations. For your safety,
DO NOT use it in hazardous
(classified) locations.
CAUT
ION: Do not use flammable or combustible substances (like
carburetor fluid used for cleaning the probe) near an open flame.
CAUTION:
When the instrument is used in an inefficient oil-fueled
appliance where there is a high emission of soot, the probe’s
sample filter may become clogged. Before every use check the
filter to confirm it is clean or replace it with a new filter.
To prevent soot intake and a clogged filter, a smoke test should be
performed before operating under such conditions. This ensures
that the furnace or boiler is burning at a level appropriate for the
use of this instrument.
1.4. Product Overview
The Monoxor

Plus is a portable hand-held carbon monoxide analyzer for use
in residential and light commercial applications. It is intended to be used by:
• HVAC contractors
• home inspectors
• maintenance personnel
• safety inspectors
to detect and display concentrations of carbon monoxide (CO) gas between
0 and 2000 ppm. The analyzer is capable of testing for CO in both ambient
room air and in the flue-gas stream of fossil-fuel fired furnaces and boilers.
A backlight enables the operator to read the display in dimly-lit areas. The
displays and menus are available in multiple languages (English, French and
Spanish).
netzerotools.com
netzerotools.com