Specifications

Configuration Monoxor

Plus Manual
22 0019-9370 Rev 0
Setup Menu Function
The Language Selection option allows the user to
choose a language for all menus. Use the UP () and
DOWN () arrow buttons to scroll through language
options. Use ENTER to enable the selected language.
Three languages are available: English, French, and
Spanish.
The button sound option is used to select whether or
not the analyzer makes an audible sound every time a
key is pressed. Select OFF to disable this feedback, or
ON to enable this feedback. Then press ENTER to
select, or ESC to discard changes.
The CAL Reminder Period option sets a time period
after which the analyzer displays a calibration reminder
message during warm-up. Calibration reminders can
be set to occur never, 6, 8, 10, 12, or 15 months after
the last calibration. Select NEVER (the default setting)
to disable this feature. When the preset period is
exceeded the instrument will display the reminder, and
how long since the sensor was last calibrated. If a
calibration reminder is displayed, the operator can
press the RUN/HOLD key to move to the RUN/HOLD
Screen
for normal operation. Regular calibration
periods of 6 months to 1 year are recommended.
Set the calibration reminder period as follows:
1. Use the UP (

) and DOWN (

) arrow buttons to
select the desired time period.
2. Press ENTER to save the selection or ESC to revert
to the previous setting.
netzerotools.com
netzerotools.com