Specifications

Configuration Fyrite

InTech

Manual
18 0024-9486 Rev 3
3.3. Main Menu
Display the Main Menu by pressing the F2 key. Note that features and items
displayed in menus are model dependent. Your screens may vary.
Main Menu Function
Access the Select Fuel Menu (see page 19)
• Select combustion fuel
Access the Ambient CO Test Menu (Siegert Only) (see
page 20)
• Initiate a 15-minute CO test
• Get reading every minute and max CO reading
• Print/Save 16 readings and max CO
Access the Memory Options Menu (see page 22).
• Access previously saved test results
• Delete all previously saved test results
Access the Setup Menu (see page 24).
• Edit/view instrument preference
• Edit/view system parameters
• Edit/view combustion test parameters
Access the Calibration Password Screen and the
Calibration Menu (see page 35).
• Calibrate sensors
Access the Diagnostics Menu (see page 36).
• View “run” meters and system diagnostic values
• Check O
2
sensor life
• Fresh air diagnostics
Access the Device Status Menu (see page 38).
• Access the software date, model number, serial
number, and version information