Instruction manual

Operation Fyrite

INSIGHT

Plus Manual
76 0024-9487 Rev 2
Bar Graph
Component
Description
Format (F3)
• Press F3 to display the Bar Graph format screen. It contains three
bar graph options–-each of which defines the combustion
parameter associated with that graph. A fourth option is selected
when editing is complete.
• Use the UP () and DOWN () arrow buttons to highlight one of
the rows corresponding to the three bar graphs (top, middle, or
bottom) (see left, below). Note that the entire line of each
position is highlighted.
When the desired row is highlighted, press ENTER to enter EDIT
mode for bar graph associated with that row. Note that this
action causes only the text portion of the row to be highlighted
(not the entire row). See right, below. Then use the UP () and
DOWN () arrow buttons to scroll through available combustion
parameters to monitor for the bar graph associated with that
row. Press ENTER to select.
• Repeat this process for up to three bar graphs.
• When finished, use the down arrow key to select the EDIT
COMPLETE option and press ENTER to return to the live bar graph
screen.