Instruction manual

Fyrite

INSIGHT

Plus Manual Operation
0024-9487 Rev 2 73
Screen Description
Graphical “Line Graph”
Trend Screen
• User-selectable combustion parameter
• User-selectable time period
Bar Graph Screen
• 1, 2, or 3 bar graphs
• User-selectable combustion parameter for each bar
• User-selectable limits for each parameter
Stack Temperature Hot
Spot Screen
• Used to dynamically locate “hot spot” in flue
• Based on stack temperature readings
• Use probe stop to maintain optimal probe position
4.7.2. Graphical Line Graph Trend Screen
Trend
Screen
Description
Graph
• Graphical representation of
a user-selected combustion
parameter (from list) over a
user-defined time period
(from list)
• Current value is shown
numerically on the graph
• Dynamic graph window provides continuous updates
Left Arrow
• Press the LEFT () arrow to go to the main RUN/HOLD Screen.
Right Arrow
• Press the RIGHT () to go to the Bar Graph Screen.
Y Axis
• Label shows user-selected combustion parameter, units, and
range values.
• The display range values at the top and bottom of the Y axis are
assigned in real time and are based on the selected combustion
parameter and its range of values over the selected time period.
X Axis
• Label shows “Time”, the selected time units (sec or min), and the
associated range values (30 sec, 1 min, 3 min, 5 min, and 15 min).
• The time value in the window scrolls.
Clear (F1)
• Press the F1 button to clear the graph and restart if in Run mode.
Menu (F2)
• Press the F2 button to return to the main menu.