Instruction manual

Configuration Fyrite

INSIGHT

Plus Manual
44 0024-9487 Rev 2
Setup Menu Function
Changing the RUN/HOLD Format
1. Use the UP (

) and DOWN (

) arrow buttons to
select EDIT FORMAT. Press ENTER to display the
current format.
2. Change data for a particular location by first using
the UP (

) and DOWN (

) arrow buttons to select
the location in the list that you want to edit. Note
that the entire line of each position is highlighted.
Press ENTER when the desired row is highlighted.
Note that this action causes only the text portion of
the row to be highlighted. See above. You are now
able to scroll
through the list of available
parameters for this position.
3. Use the UP (

) and DOWN (

) arrow buttons to
scroll through and select the desired data to appear
in that position of the display. Press ENTER to save
the selection for that row.
4. Change the data displayed at other locations by
repeating steps 2 and 3.
5. When finished, use the UP (

) and DOWN (

)
arrow buttons to select EDIT COMPLETE, located at
the bottom of the list. Press ENTER to save the
new display format and return to the RUN/HOLD
Format options.