Instruction manual

Fyrite

INSIGHT

Plus Manual Configuration
0024-9487 Rev 2 41
Setup Menu Function
EDIT TEST ID
NOTE: This data can also be entered
using the Fyrite

User Software (FUS).
To Edit the contents of a Test ID record, use the UP (

)
and DOWN (

) arrow buttons to highlight the Edit Test
ID option and press ENTER.
Use the UP (

) and DOWN (

) arrow buttons to
highlight your desired choice from the list of 10 Test
IDs (the first line of each Test ID is shown). Once
highlighted, press ENTER to select that Test ID. The
text associated with the selected Test ID (if any) is
displayed (3 lines per Test ID) along with the EDIT
COMPLETE option.
Use the UP (

) and DOWN (

) arrow buttons to
choose which of the three Test ID lines to edit and then
press the ENTER key to begin editing the chosen line.
Use the UP () and DOWN () arrow buttons to select
the desired letter, number, or special character.
/ ! @ # $ & * - ‘ <SPACE> a-z A-Z 0-9
Use the LEFT () and RIGHT () arrow buttons to
move the cursor horizontally on the selected row.
Press ENTER to save the row’s changes.
Repeat for all 3 lines. Then select EDIT COMPLETE and
press ENTER to finish.