Specifications

1.800.736.4666
BACHARACH
30
Monoxor
®
III
Carbon Monoxide Analyzer
Bacharach’s New Monoxor III, offers service technicians the easiest and most affordable way to locate CO in ambient
air as well as stack gases.The Monoxor III CO Analyzer is a battery powered, hand-held instrument that
can quickly and accurately measure levels of CO between 0 and 2,000 ppm. In addition to locating CO in ambient
air, the Monoxor III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases
of residential furnaces, combustion appliances, commercial and industrial boilers. An optional wireless IrDA printer
provides a permanent record of the detected CO level.
- NEW -
ORDERING INFORMATION
PART NO. DESCRIPTION
19-8104 Monoxor III, includes 4 ‘AA’ batteries, probe & hose
assembly with integral water-trap / filter, and a hard
carrying case.
19-8105 Monoxor III, includes 4 ‘AA’ batteries, probe & hose
assembly with integral water-trap / filter, and a hard
carrying case, plus an IrDA printer with an assortment of
printer accessories including an AC adapter, roll of paper,
in-car charger, belt clip, and magnet
24-1229 IrDA Printer
24-1265 Replacement CO sensor
24-7059 Calibration Kit (without CO gas)
24-0492 CO gas cylinder, 500 ppm
51-1994 CO gas cylinder, 100 ppm
SPECIFICATIONS
Range 0-2,000 ppm
Resolution 1 ppm
Accuracy +_ 5% of reading or 10 ppm, whichever is greater
OPERATING TEMP.:
Instrument: 32-104
O
F (0-40
O
C)
Probe: 1,000
O
F (538
O
F
Battery Life 24 hours continuous (minimum of 16 hours)
Display Four-digit LCD display w/backlight
Power 4 ‘AA’ Alkaline batteries
Printer Port IrDA or HP protocol
Weight 16 oz. with batteries
Dimensions 7.5”H x 3.1”W x 2.1”D (190mm x 79mm x 53mm)
Warranty 2 years, including sensor
NowWith Printing Capability
The One You Know... Only Better.