Specifications

1.800.736.4666
BACHARACH
14
SPECIFICATIONS
Measurement Combustion Air/Ambient
Air Temperature 32 - 212˚F (0-100˚C)
Ranges Flue Gas Temperature 0 - 999˚F (-18 to 537˚C)
Oxygen 0.0 to 20.9% O
2
Carbon Monoxide 0 to 2,000 ppm CO
Draft / Differential Pressure -10.0 to +27.0 in. WC
Calculated Combustion Efficiency 0.1 to 99.9%
Ranges Carbon Dioxide 0.1 to a fuel dependent max.
value in percent
Carbon Monoxide (air free) 0 to 9,999 ppm
Excess Air 0 to 400%
Selectable Natural Gas (F1)
Fuels Oil #2 (F2)
Propane (F3)
Kerosene (F4)
Power Four disposable AA alkaline batteries (included)
Battery Life 24 hours of continuous operation (minimum of 16 hours)
Size 7.5”H x 3.1”W x 2.1”D (19.0 cm x 7.9 cm x 5.3 cm)
Weight 16 oz. with batteries
Warranty 2 years, including sensors
PART NO. DESCRIPTION
24-1229 IrDA Printer (Consult your instruction manual to verify which printer will work
with your instrument)
06-8733 Spare paper roll (1) for IrDA Printer
21-7006 True Spot Smoke Test Set
24-1127 Protective boot w/ magnet
24-7265 Replacement CO sensor
24-8106 Replacement O
2
sensor
104-1797 10 ft. thermocouple assembly (for primary air temp)
104-1798 1 in. thermocouple (for room air temp)
24-7059 Calibration kit (Less cal. gas)
51-1994 Calibration gas (100 ppm CO)
24-8214 Pressure Accessory Kit: Includes 44’ of tubing, one pilot tube, two static pressure
tips, one flexible copper tube & one 1/8 NPT gas valve fitting.
24-1267 Optional soft carrying case
07-1644 Filters for water trap / filter assembly, pack of 3
ORDERING INFORMATION
MODEL
P/N MEASUREMENTS CALCULATIONS ACCESSORIES
Model 100 Carbon Monoxide Probe/Hose Assembly
P/N 24-8200 Hard Carrying Case
Model 100 Kit Carbon Monoxide Probe/Hose Assembly
P/N 24-8201 Hard Carrying Case
IrDA Printer
Model 105 Carbon Monoxide Probe/Hose Assembly
P/N 24-8202 Draft Hard Carrying Case
Differential Pressure
Model 110 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8103 Flue Gas Temperature Excess Air Hard Carrying Case
Ambient Temperature Carbon Dioxide
Model 120 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8104 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide
Ambient Temperature CO (air free)
Model 125 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8105 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
Draft CO (air free)
Differential Pressure * Delta Temperature
Combustion Air/Ambient Temp.
Model 125 Kit Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8205 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
Draft CO (air free) IrDA Printer
Differential Pressure * Delta Temperature
Combustion Air/Ambient Temp.
Model 125 Oil Kit Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8206 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
Draft CO (air free) IrDA Printer
Differential Pressure * Delta Temperature True Spot Test Kit
Combustion Air/Ambient Temp.
SPARE PARTS AND ACCESSORIES
All models have printer capability, are fully upgradeable and include batteries.
To order a Fyrite Pro Combustion Analyzer, contact your local
Bacharach distributor, or call 1-800-736-4666 for more information.
Each Fyrite Pro that is equipped with Draft / Differential Pressure
includes gas pressure test tubing with barbed fitting for ease of
appliance line and manifold gas pressure measurement.
Probe P/N 19-7110
For Model 100
(Without thermocouple)
Probe P/N 19-7111
For Models 110 & 120
(With Thermocouple)
Probe P/N 24-7266
For Models 125 & 105
* Requires optional thermocouple P/N 104-1798 or 104-1797.