Specifications

CO2 Analyzers 3100 & 3150
Instruction 19-9339 49
12.0 Event Log
The following events are recorded in the instrument’s event log. The
event log can only be downloaded using the additional PC software.
Please refer to the PC software manual for further details.
Event Data
Cold Start / Reset Type of start (MCUSR, boot_key)
Firmware Version Description
Set Time Before and After
Set Date Before and After
Re-Flash Requested Type
Restore to Factory Settings Type
Comms Clear Memory Type 0=Readings, 1=Event Log
Change Contrast Before and After
Change Flow Fail Current Limit Before and After
Battery Less Than Critical Voltage Critical, Actual
RTC Date/Time Invalid None
Factory Calibration Invalid or Overdue Date, Difference
Service Invalid or Overdue Date, Difference
Power ON Self-Test, Sensor Out of Range Channel, Reading, Limit
User Calibration Set Zero OK Before, After
User Calibration Set Span OK Target, Before, After
User Calibration Set Zero Failed Target, Reading
User Calibration Set Span Failed Target, Reading
Attempt to Store when Readings Memory
Full
Max
Readings Memory Nearly Full Limit, Actual
Change Logging Mode Status, Interval, Pump time
Change Logging Mode ID ID
Flow Fail Current Limit Exceeded Limit, Actual