Specifications

CO2 Analyzers 3100 & 3150
Instruction 19-9339 29
When plugged into the charger, the instrument light will power on and
display charging. When complete, the display will change to show
that the instrument is charged. To switch the instrument on while
charging or charged is displayed, the operator will need to switch the
instrument off and then on again.
NOTE: A full charge will take approximately 3 hours. Typically, a fully
charged battery will last 8-10 hours.
When the instrument is already powered on the battery icon changes
to a fl ashing plug symbol. This will stop fl ashing when the charge is
complete.