Specifications

CO2 Analyzers 3100 & 3150
Instruction 19-9339 28
2) Press “KEY 4” to view data.
3) To clear the readings press the soft-key “MORE” followed by “KEY
1 - DELETE ALL.”
5.9.5 Diagnostics
The “DIAGNOSTICS” option enables remote technical support to
identify and resolve issues with the instrument and readings. If
required, the operator may be asked to confi rm the diagnostics
displayed.
1) From the “MAIN READ SCREEN” press the “MENU” key.
2) Press “KEY 5” to view diagnostics.
NOTE: For further information contact your nearest Bacharach
Service Center.
5.10 Warning and Error Codes
When switched on, the instrument will perform a predetermined
self-test sequence taking approximately 60 seconds. During this
time, many of the instrument’s working parameters and settings are
checked. If any operational parameters are out of specifi cation or
if the pre-programmed recommended calibration / service date has
passed, errors or warnings may be displayed.
NOTE: For further information please refer to Section 8.0 Problem
Solving.
5.11 Battery / Charging
The battery used in the instrument is a 2 Ah Lithium-Ion cell. The
instrument must be charged using the power supply supplied with your
instrument.
NOTE: Although the instrument can be powered via the USB
connecter, it cannot be charged via USB.