Specifications

CO2 Analyzers 3100 & 3150
Instruction 19-9339 26
5.9.2.7 Reset
The instrument can be reset by pressing “KEY 7 - RESET” accessed
via the “UTILITIES” menu. Selecting this option will clear all user
settings and any stored data including the event log.
A confi rmation code (12345678) must be entered to confi rm that a
reset is initiated.
5.9.3 Calibration
The instrument is fully calibrated during manufacture and when
returned for service. However, to improve accuracy between services,
a user/fi eld calibration can be performed.
NOTE: For further information please refer to Section 7.0 Calibration.
5.9.4 View Data
The “VIEW DATA” option enables the operator to view the stored
readings.
1) From the “MAIN READ SCREEN” press the “MENU” key on the
instrument panel.
2) Press “KEY 4” to view stored data readings and the following
screens will be displayed:
3) Press KEY 4 - SCROLL LEFT” and “KEY 6 - SCROLL RIGHT” to
move through the stored readings either forwards or backwards.
Press “KEY 2 - SCROLL UP” and “KEY 8 - SCROLL DOWN” to
switch between the fi rst (CO
2
, O
2
, & Baro) and seconds (T
1
, T
2
, &
humidity) group of reading parameters.