Specifications

MyBacharach.com • Fyrite

InSIght • Instruction 24-9460

Connecting the INSIGHT

Computer to INSIGHT Connection

& USB Device Driver Configuration

Connect the USB cable (P/N 104-4032) that was supplied with the InSIght, and, if necessary,

install the analyzer’s USB device driver as follows:

1. With both the Insight and computer turned ON, insert the

appropriate ends of the USB cable into the USB connectors

on the InSIght and computer as seen below.

2. If this is the first time the Insight is being connected to the

computer, then the “Found New Hardware Wizard” should

shortly appear. Select “No, not this time” and click NEXT.

(Note: The USB device driver only needs to be installed

once. It does not require to be re-installed each time

the Insight is connected to the the computer.)

3. Select “Install from a list or specific location (Advanced)”

and click NEXT.

4. Select to search for the best driver and then browse to folder

C:\Program Files\InSightData. Click NEXT.

5. At the Hardware Installation window, click CONTINUE

ANYWAY. Our driver has been thoroughly tested in

Windows for stability. This message appears because

Microsoft has not tested this product through WHQL

certification.

6. After the Found New Hardware Wizard has finished

installing the software, click FINISH to close the Wizard.

* Only available with the Reporting Kit