Specifications

Instruction 24-9460 • Fyrite

InSIght • MyBacharach.com

Performing Tests

Pressure

1. To measure draft, gas pressure, External Static Pressure, differential pressure, troubleshoot

pressure sensors, etc, press the F2 button to go to the MAIN MENU. Press the scroll down

button once to Highlight PRESSURE and press the center, green, ENTER button. Press the

F2 button to ZERO the pressure channel and follow the prompts in the screen.

2 Press the ESC button at any time to return to the previous screen.

Temperature (Differential)

1. Select the TEMPERATURE feature in the main menu to record/document temperature

differences (ie temperature rise). Two ‘K’ type thermocouples must be plugged into the bottom

of the instrument to use this feature. Press the F2 button to zero the temperature channels.

a. Note: Thermocouple should be located in same area to zero.

Saving test results

1. To save test results, simply press the F3 Key. To access the saved test results, go to the MAIN

MENU, scroll down to MEMORY and press the green ENTER button. Press the MEMORY

DIRECTORY and up to 100 sets of test results will load up. Scroll down to find the time/dated

set of test results and press the ENTER button to recall that information.

Documenting Test Results

1. To print a set of test results, point the IR transmitter located in the top of the INSIGHT, and

press the F1 or PRINT KEY. Flue gas test results or diagnostic information in the screen will

be printed.

2. To download the test results to the Bacharach Software through the supplied USB cable,

follow the instructions included with that package.